After using FRP cooling tower packing for a period of time, cleaning work is inevitable, so how to clean specifically, what should we do? Please look at the following:

　　 FRP cooling tower filler cleaning method (1)

Manually clean the scale and slag that has fallen off in the cooling tower; repeatedly wash the packing with a high-pressure water gun to remove the cleaned sludge scale; etc.; dissolve the TNB descaling agent with hot water at about 50 ℃ and then repeatedly wash the packing with the rinse pump until the scale is clean (If the filler is used for a long period of time, causing aging and collapse, it is recommended to replace the filler), at the same time add bactericidal algaecide to kill biological algae and bacteria; after confirming that all parts of the system are cleaned, drain the sewage; rinse the filler and clean water Inside and outside the tower; restore the system and use water after replenishment; after all restoration, please ask the management personnel of Party A to check and accept; evacuate the items of Party B and clean the site.

　　 FRP cooling tower filler cleaning method (2)

Temporarily build a large pool with plastic cloth; add cleaning agent to clean water; remove the filler from the cooling tower and soak it in the medicine pool; rinse the soaked filler with clean water and install it back into the cooling tower; use a sticky agent Put the cloth on the cooling tower water replenisher and soak the water replenisher port; use the same method to remove the scale of the cooling tower chassis; rinse the packing and the inside and outside of the tower body with fresh water; restore the system and use it after replenishing water.

　　The above two methods can be used to clean the filler of FRP cooling tower. Our company specializes in the production of cooling towers. Friends in need can contact us.