Brief introduction of Tailing square cross flow cooling tower:

The square cross-flow cooling tower adopts air inlet on both sides, and the fan on the top allows the air to exchange medium with hot water through the packing on both sides of the tower, and the hot and humid air is discharged outside the tower. The filler adopts a point wave plate with convex points on both sides, and the point wave plate is bonded into a whole through the mounting head to improve the rigidity. The convex points on both sides can also avoid direct dripping, so the water film forming ability is improved. Water measures.

Tai Ling of Songyuan square cross-flow cooling tower:

Panel: FRP material, smooth and beautiful surface, corrosion resistance, anti-aging.

Filler: Modified PVC bidirectional wave plate, good thermal performance, low air flow resistance, good rigidity, heat resistance 75 ℃, cold resistance, flame retardant.

Fan: The blade material is alloy aluminum plate. The fan has reasonable aerodynamic force, large air volume, high efficiency, low noise and corrosion resistance.

Motor and reducer: Copper core motor for fully enclosed waterproof cooling tower, energy saving and stable.

Water trough: glass fiber reinforced plastic material, uniform water distribution, ultra-low noise type with cover plate to shield the light, prevent debris from flying in, and reduce the splashing sound.

Muffler cover: glass fiber reinforced plastic material, flame retardant PVC film muffler material with internal sticky cavity.

Water tank: made of glass fiber reinforced plastic, it has the function of collecting water, and is equipped with automatic water supplement facilities, which can directly absorb water in a closed circuit.

Skeleton: It is a folded steel assembled structure with good rigidity, light weight, easy transportation and installation, and anti-corrosion by hot-dip galvanizing.

Design features of Tailing square cross-flow cooling tower:

1. Space saving and light structure:

Using high-efficiency heat-exchange packing specially designed for this series of cooling towers, its heat exchange area is greatly increased, compared with the original BY-H series and the original BY-HS series, its footprint is greatly reduced due to the optimization of structural design And using steel structure, the running weight is also greatly reduced.

2. Power saving:

The use of fillers with small ventilation resistance and the wing-shaped glass fiber reinforced plastic high-efficiency fan specially designed for cooling towers by Tsinghua University reduces the power of the motor used. The ultra-low noise type uses a smaller motor power, which is more energy-saving and stable. It is more environmentally friendly, and can be equipped with a two-speed motor to save power according to user requirements.

3. Very low operating noise:

Adopt Tsinghua University's low-noise axial fan with FRP material specially designed for cooling tower and low-noise motor specially designed for cooling tower, thus reducing the operation noise of cooling tower. Ultra-low noise series cooling towers have lower operating noise and fully comply with environmental protection requirements. If equipped with a two-speed motor, the noise can be further reduced by 2-3dB(A) during low-speed operation at night. Users who require a two-speed motor should make separate requests when ordering.

4. Good corrosion resistance:

The tower body, sink and panel are made of FRP material with good corrosion resistance, and a light stabilizer is added to the gel coat resin. It has good anti-aging properties and does not change color over time. The steel structure of the tower body is treated with hot-dip galvanizing after processing to improve the corrosion resistance of the cooling tower. In the normal service life, no additional anti-corrosion is required. If the user's water quality is acidic or alkaline, it is recommended that the customer customize a special anti-corrosion cooling tower.

5. Convenient combination:

Combination methods can be used to meet the requirements of different working conditions, users can also decide to combine according to the site conditions, and can adjust the appearance of the cooling tower according to the characteristics of the user's building. If the user site is very limited. Our company can also design according to the special requirements of users to meet the requirements of users on thermal performance and noise.

6. Easy maintenance:

The BY-H series cooling towers are of a combined design. The air chambers of adjacent cooling towers are separated from each other. Maintenance and repairs can be carried out under the premise of normal operation of the cooling tower, and the work of cleaning the packing, water pipes and water tanks is more convenient.